No |
Items | Standard | ||||||||||||||||
1 | Rated load(kg) |
630(8P) | 800(10P) | 1050(14P) | 1350(18P) | 1600(21P) | ||||||||||||
2 | Shape | Circular | Square | Diamond | Circular | Square | Diamond | Circular | Square | Diamond | Circular | Circular | ||||||
3 | Speed(m/s) | 1.0 1.75 |
1.0 1.75 |
1.0 1.75 |
1.0 1.75 |
1.0 1.75 |
1.0 1.75 |
1.0 1.75 |
1.0 1.75 |
1.0 1.75 |
1.0 1.75 |
1.0 1.75 |
||||||
4 | Control Method | Full selective collection | ||||||||||||||||
5 | Driving Method | VVVF driving | ||||||||||||||||
6 | Door Operator | VVVF door operator | ||||||||||||||||
7 | Traction Machine | Permanent magnet synchronous gearless | ||||||||||||||||
8 | Control System | CTRL70 | ||||||||||||||||
9 | Communication Method | Serial communication | ||||||||||||||||
10 | Car Size(mm) (W*D*H) |
1100* 1400* 2350 |
1100* 1550* 2350 |
1100* 1550* 2350 |
1300* 1450* 2350 |
1300* 1600* 2350 |
1300* 1600* 2350 |
1500* 1600* 2350 |
1500* 1700* 2350 |
1500* 1700* 2350 |
1700* 1900* 2350 |
1700* 2200* 2350 |
||||||
11 | Door Opening (mm) (W*H) |
800*2100 CO | 800*2100 CO | 900*2100 CO | 1100*2100 CO | 1100*2100 CO | ||||||||||||
12 | Travel(m) | ≤75 | ≤75 | ≤75 | ≤75 | ≤75 | ||||||||||||
13 | Shaft Size(mm) (W*D) | 2200* 1850 |
2200*2050 | 2400* 1950 |
2400*2050 | 2600* 2050 |
2600*2150 | 3050*2350 | 3050*2650 | |||||||||
14 | Traction machine position | Inside the shaft |
15 | Overhead (mm) |
1.0 | 4700 | 4700 | 4700 | 4700 | 4700 | 4700 | 4700 | 4700 | 4700 | 4700 | 4700 |
1.75 | 4900 | 4900 | 4900 | 4900 | 4900 | 4900 | 4900 | 4900 | 4900 | 4900 | 4900 | ||
16 | Pit (mm) |
1.0 | 1500 | 1700 | 1600 | 1500 | 1800 | 1600 | 1500 | 1900 | 1600 | 2000 | 2000 |
1.75 | 1650 | 1850 | 1750 | 1650 | 1950 | 1750 | 1650 | 2050 | 1750 | 2150 | 2150 | ||
17 | Rated power (kW) |
1.0 | 4.2 | 5.3 | 6.6 | 9 | 10.6 | ||||||
1.75 | 7.3 | 9.3 | 11.6 | 15.7 | 18.6 | ||||||||
18 | Rated current (A) |
1.0 | 10 | 12 | 15 | 21 | 25 | ||||||
1.75 | 17 | 21 | 27 | 36 | 43 | ||||||||
19 | Main power supply &cable size | 380V,50Hz,3-phase 5-wire,zero wire and ground wire separated, requirement refer to construction drawings | |||||||||||
3x6mm2+2x6mm2 or 3x10mm2+2x6mm2 | |||||||||||||
Note: Above overhead is only applicable in non-steel structure shaft and the gap between car top and shaft wall less than 700mm. |
Teléfono fijo:
+86-769-8207-8888